3TCGARAGE.COM

Well followed all everything y'all said and now it's running pretty darn good

yup that's me i dont think i did but would you happen to know how to set correct valve lash i have yet to find it in my search's but like you said i need to check and see if i bent anything.

Thanks bob that was very helpful but of course I have other issues now cylinders #1 and #3 have no compression at all #2 has 90psi which is also to low and # had 150 which are good numbers my guess is the valves need to be adjusted. Am I on the right track or am I S.O.L.

I have a 3tc I've been trying to get running and with most of the other issues out of the way now I can't get the timing right to where it will idle smoothly I don't much about the engine except it was rebuilt before I bought it as a short block I have a weber 32/36 and that's all of the mods Does a...

Well after due diligence I finally figured out what I believe to be the issue I'll know for sure Monday

i just mated a used a40 from a salvage yard to my 82 3tc but after puting it in the car i noticed a scraping sound when i turned the crank and flywheel to install the torque converter bolts, so i removed the starter which caused the scraping sound but i also noticed the flexplste was too far from th...

I need advice on replacing the Kickdown cable on my 82 corolla it has the a40 trans thanks in advance just need a point in the right direction

This is the coupler I'm asking about

I have an 82 corolla that I'm having a problem replacing the steering coupling so some advice would be awesome if there's anyone that could help ... I know this last part doesn't belong in the thread but I also need advice on how to remove a transmission pump

My name is Les and you can call or text me at 2147962946 thank you.