Search found 8 matches
- Tue Jun 14, 2016 12:22 pm
- Forum: Engine and Drivetrain
- Topic: Distributor Recurve
- Replies: 2
- Views: 5395
Distributor Recurve
Hi All Just wondering if anyone has recurved their distributor? Also what is the maximum allowable amount of advance the distributor will allow? I run a 2TC in my KE55 Corolla, with the engine highly modified I'm just looking to recurve my Advance curve and total advance to suit the engine Also the ...
- Tue Jun 14, 2016 12:13 pm
- Forum: Turbo and Engine Management
- Topic: Electronic ignition upgrade on a 3t-c
- Replies: 4
- Views: 14523
Re: Electronic ignition upgrade on a 3t-c
if you remove the dizzy, your going to need a ignition computer, crank trigger, coil packs, and tuning. If you stay with the electronic dizzy use the msd 6 or 7 series. If your tuning the total timing you can use the gm recurve kit. Is that the MSD GM Recurve Kit that you can adjust the total advan...
- Sun May 29, 2016 9:13 pm
- Forum: Turbo and Engine Management
- Topic: 3tc Engine swap
- Replies: 1
- Views: 8223
Re: 3tc Engine swap
Hey Mate
I did the conversion in my KE55
I had a 4k with a k50 trans in it before
bolted the engine in on the standard crossmember and rotated the trans crossmember 180 degrees
all bolted in and used the standard tailshaft with the tailshaft being the correct length
I did the conversion in my KE55
I had a 4k with a k50 trans in it before
bolted the engine in on the standard crossmember and rotated the trans crossmember 180 degrees
all bolted in and used the standard tailshaft with the tailshaft being the correct length
- Wed Sep 24, 2014 2:45 pm
- Forum: Engine and Drivetrain
- Topic: Intake manifold hose, where does it go and what does it do?
- Replies: 4
- Views: 7169
Re: Intake manifold hose, where does it go and what does it
Hi Roger
Yeah might do this as have found my plate is also corroded, soight just get a delete plate made.
Cheers for the advice but will see how it goes
Cheers
Todd
Yeah might do this as have found my plate is also corroded, soight just get a delete plate made.
Cheers for the advice but will see how it goes
Cheers
Todd
- Mon Sep 15, 2014 10:51 pm
- Forum: Engine and Drivetrain
- Topic: Intake manifold hose, where does it go and what does it do?
- Replies: 4
- Views: 7169
Re: Intake manifold hose, where does it go and what does it
Cheers mate, appreciate it, will hook that up
- Sun Sep 14, 2014 11:22 pm
- Forum: Engine and Drivetrain
- Topic: Intake manifold hose, where does it go and what does it do?
- Replies: 4
- Views: 7169
Intake manifold hose, where does it go and what does it do?
Hi all Was wondering there the hose that connects into the bottom of the intake manifold go to and what does it do? images-2.jpeg Attached is a picture of the bottom of the intake manifold, I'm referring to the pipe that comes off the bottom that looks to be made of tin, mine is blocked off and wasn...
- Sun Aug 24, 2014 2:44 am
- Forum: Engine and Drivetrain
- Topic: Engine Oil & Coolant Temperatures
- Replies: 1
- Views: 3274
Engine Oil & Coolant Temperatures
Hi all Was wondering what oil and coolant temperatures everyone is running? I recently did a 2TC conversion in my KE55 Corolla The engine has en fitted with a large cam and I'd say higher compression But I affordable a mate and don't know the exact specs Anyway I put a thermostat in it as food it wa...
- Sun Aug 24, 2014 2:17 am
- Forum: New member introduction
- Topic: Hi from Australia
- Replies: 3
- Views: 5996
Hi from Australia
Hi all
images new member from South Australia
I own a KE55 Corolla with a 2TC swap
Glad to be a new member of the forum
Cheers
Todd
images new member from South Australia
I own a KE55 Corolla with a 2TC swap
Glad to be a new member of the forum
Cheers
Todd