3TCGARAGE.COM

hi guys..

someone has experience with the cam bearings??

a old mechanic told me if the cam bearings were not the corrects or the technicians make something wrong when he put it in position maybe this is the cause of my low presion..!!

someone hear something like this or have a similar situation..

hi guys... i just take the engine out to recheck the crank and the rods bearing.. i make some plastigage test and everything was in great shape... now i'm going to find another oil pump the make another test to see if some change... my idle pressure is in 2psi when accelerate the engine up to 3000rp...

thanks for the info...!!

and running what psi should have??


i don't want to run the car before i'm sure is not going to be damage because the pressure is to low... i have a 4k engine before and the pressure was totally different...


thanks for the reply..!!

hi guys.. i just swap a 2tc on my suzuki sj410, but i'm having a oil pressure issue, when i start the car the pressure just get to 6 psi on idle, when accelerate to 2500rpm get to 22 psi.... i pull up the valve cover and is lubricatin all well... i make some test changing the oil pressure hose, then...

hi guys..

i think u can find some ARP kits en ebay, came with the flywheel bolts, the rods bolts, and the main stud...

hi..

on ebay you can find some 3tc engine in good shape..

i was looking on ebay and i find a clegg master rebuild kit..!!

somone can tell me if those kits are good..??

thanks..

i´m from panama..!!

someone from latinoamerica???

hi guys..!! i just buy a 2t engine and i want to fit a 3tc crank but i need to buy some oversized 3tc piston.. someone know where i can find some cheap pistons. im new in this T engine, before i have a 4k with a 32/36 weber carb, a custom made header and a 298 cam. now i want more power thats why i ...