Search found 6 matches
- Sun Nov 13, 2016 9:28 pm
- Forum: Engine and Drivetrain
- Topic: need advice on engine
- Replies: 0
- Views: 5220
need advice on engine
so recently my motor seemed dead on cylinder 3(heat checked the exhaust while i was tuning my side drafts). did a test it was 90 on 1-2 and 60 psi on 3. changed the head gasket and that bumped the psi up about 30 more psi on cylinder 3 and a bit more on 1 and 2 but it still is too low and is dead. i...
- Wed Oct 12, 2016 11:59 pm
- Forum: Engine and Drivetrain
- Topic: Mikuni 40phh tuning
- Replies: 3
- Views: 7014
Re: Mikuni 40phh tuning
Msd ignition.
Carb was jetted or was ran on a similar built motor with just a 284 cam.
Carb was jetted or was ran on a similar built motor with just a 284 cam.
- Wed Oct 12, 2016 11:58 pm
- Forum: Engine and Drivetrain
- Topic: Mikuni 40phh tuning
- Replies: 3
- Views: 7014
Re: Mikuni 40phh tuning
Cam is 280 duration 464 lift, performance springs from brd, stock ported head, stock valves.
- Tue Oct 11, 2016 8:44 pm
- Forum: Engine and Drivetrain
- Topic: Mikuni 40phh tuning
- Replies: 3
- Views: 7014
Mikuni 40phh tuning
So I'm picking up a pair of mikuni 40 phh carbs and I was looking for some tuning tips. I have a pretty good knowledge of tuning carbs on these motors but have never messed with side drafts.
- Mon Oct 03, 2016 7:18 pm
- Forum: Engine and Drivetrain
- Topic: 3tc locked distributors
- Replies: 1
- Views: 5371
3tc locked distributors
I've got my motor put together and now I'm questions wether I should have a locked distributor or not. I was having timing issues but I'm getting that solved. My question is should I be running a locked dizzy with a big cam or not? And what size jets should I run on a 32 36? Cam is 280 duration 464 ...
- Sat Sep 10, 2016 8:16 am
- Forum: Engine and Drivetrain
- Topic: 3tc BRDRACING rocker shaft collars
- Replies: 1
- Views: 4311
3tc BRDRACING rocker shaft collars
so ive got some rocker shaft collars from BRDRACING and if theres a certain amount of gap there should be between rocker arm and the collar... if anyone has any numbers let me know please!