3TCGARAGE.COM

I need both passenger and driver front seat belts, the vinyl cover for the rear wheel wells and the fan switch, the 1980 was 3 speed. Also if anyone knows where I can get one, also looking for the JDM front emblem like the one in the picture of the banner of the webpage. XXX C what color seat belts...

I need both passenger and driver front seat belts, the vinyl cover for the rear wheel wells and the fan switch, the 1980 was 3 speed.

Also if anyone knows where I can get one, also looking for the JDM front emblem like the one in the picture of the banner of the webpage. XXX C

I just need to know what springs I can use in case I want to go back to stock height. Also wanted to know if I could use the energy suspension bushings kit (part number 182010) which is specific to AE86 to replace the suspension bushings which are brittle and worn out.

I checked and the cover is 8 bolt. I also took the springs off and the spring insulator has part number E8DC-5414-AB. I can't find this part number on the internet so it's probably discontinued a long time ago. The closest thing I could find is SM5414 which are spring insulators for Ford Taurus and ...

You may be right, I thought KE70/TE72 came with leaf springs in the back, my car is 1980. I have the Haynes manual that says all earlier cars had leaf springs and later cars had coil springs. I'll check the number of bolts on the diff cover and see how many it has.

Pics of the rear end. http://i46.photobucket.com/albums/f143/skrachvynl/image_zps6c70e573.jpeg http://i46.photobucket.com/albums/f143/skrachvynl/image_1_zps6f4394fa.jpeg http://i46.photobucket.com/albums/f143/skrachvynl/image_2_zpseeb14b15.jpeg Anyone recognize that lateral bar? http://i46.photobuck...

My 1980 TE72 has modified rear suspension. The leaf springs were taken out in favor of coil springs but I don't know where they're form because they're so old and dirty that any identifying markers are gone. The shocks are Monroe part number 32126 which after research I found were used in many domes...

fixed the problem, I got adapters. the rims I got are 108mm.

I want to get aftermarket rims but I need hubcentric rings so they sit centered. Does anyone know the inner diameter for the hubs in millimeters? I measured it and it's around 57.1mm but I know later gens are smaller at 54mm. I also read on another post that it's 60mm. Does anyone know for sure?

I'll post a pic this weekend