3TCGARAGE.COM

Warren wrote:As long as the efi setup is made by correctly it will always be more reliable.

True. The efi won't leak as much as a carb setup. Carb setup can be cheap and reliable, but I do think that efi is the way to go as far as consistency and reliability. Although you can make a carb setup work well.

I did buy the tires used. Quick question, do you think that by looking at the wheels from the top of the fender a good indication of determining if the wheels are aligned? The wheels do point outwards a bit. They sit like this (fender)] / (wheel out a bit)? I'll take a pic of it and post it up so yo...

I have a 1987 Merkur XR4ti (German Ford) turbo with a 2.3L turbo that I've had around for a couple of years now. My intention was to make this a daily driver, but ended up getting a truck so the Merkur pretty much sits in the drive way. I've bought a few parts with the intention of restoring it, but...

Hi guys. I just replaced my stock TE72 wheels with a set of aluminum 14x8 celicas. The thing is that now when a drive about 30 mph or more and even when I'm slowing down to a stop, the wheels begin to wobble. It starts to pull side to side. I've had the wheels balanced already. I've never changed th...

I've thought about doing this before. This is what I would do, block off the choke system (JB weld will do it), use a nitrophyl float (black one) and a 5 1/8 inch carb hat adaptor so that you can put on a turbonetics hat or any other for that matter. This is what the adaptor looks like http://www.eb...

Hi Dj flights, I have a 350 cfm blow thru with stock 3tc intake in the works. I've tried many different combinations like a 600 4010 Holley marine and a 390 cfm Holley and even an eldelbrock with the BRD 4 barrel intake manifold, personally I think that is way overkill. The setup that has worked the...

juan wrote:Glad the fourm is up and running thanks

Is this toyota1515 aka "Demon" ahhhhh!!!!! Hola Juan?

I think this is a no brainer as long as this site doesn't have anymore software problems.