MG with 2TC Power

Take the time and tell us a little about yourself

Moderators: BOBLOOK, AE25, pufito18

Post Reply
BritishJunk
Posts: 2
Joined: Wed Jan 07, 2015 6:51 pm
Location: Peoria, Illinois
Contact:

MG with 2TC Power

Post by BritishJunk »

Nick Baker, 24, Peoria IL

Working on putting a 2TC in my 1959 MG MGA. I know my way in and out of MGs but don't know much about the 2TC/3TC. My last project was a MG Midget with a 2TC (https://www.youtube.com/watch?v=y5uJHT5_m74). I just Finished rebuildig the engine and am in need of a few extra parts that are missing.

Parts Needed:
-Water Neck
-Alternator Bracket
-Water Pump Pulley
-Imput shaft seal for my T50 (I dont know how to find one of these, I dont know if all T50s are the same or if there are variations, any help would be apreciated)

Also I have 3 different heads, all similar but small variations and different casting numbers, anyone know anything about this?

-Nick
Nicholas J. Baker
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: MG with 2TC Power

Post by BOBLOOK »

Welcome nick show some picture of you ride ;)
The day we learn to think
User avatar
73GTV
Posts: 123
Joined: Wed Jul 10, 2013 2:17 am
Location: Warner Robins, Ga 31088

Re: MG with 2TC Power

Post by 73GTV »

BritishJunk wrote:Nick Baker, 24, Peoria IL

Working on putting a 2TC in my 1959 MG MGA. I know my way in and out of MGs but don't know much about the 2TC/3TC. My last project was a MG Midget with a 2TC (https://www.youtube.com/watch?v=y5uJHT5_m74). I just Finished rebuildig the engine and am in need of a few extra parts that are missing.

Parts Needed:
-Water Neck
-Alternator Bracket
-Water Pump Pulley
-Input shaft seal for my T50 (I don't know how to find one of these, I don't know if all T50s are the same or if there are variations, any help would be appreciated)

Also I have 3 different heads, all similar but small variations and different casting numbers, anyone know anything about this?

-Nick
http://members.iinet.com.au/~stepho/

Take your time and look at this section slow and careful and most of your specifications for the engine and manuals are available here.
Post Reply