3tc adapter for a tremec t5 trans

Webers, Cam selection and Ignition upgrades.

Moderators: AE25, BOBLOOK, pufito18

Post Reply
bigkahuna
Posts: 2
Joined: Thu Jul 14, 2016 6:55 am

3tc adapter for a tremec t5 trans

Post by bigkahuna » Mon Sep 05, 2016 11:14 pm

Does anyone know if there is such a thing?
For the price I rather use the tremec than a Toyota trans . Plus you can change all the gear ratios in the trans to suit what you need
D

BOBLOOK
Posts: 2283
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: 3tc adapter for a tremec t5 trans

Post by BOBLOOK » Wed Sep 07, 2016 5:56 am

Am sure with the proper bell housing adapter it will work , 13b to tremec is possible as so 3TC
The day we learn to think

bigkahuna
Posts: 2
Joined: Thu Jul 14, 2016 6:55 am

Re: 3tc adapter for a tremec t5 trans

Post by bigkahuna » Fri Sep 09, 2016 5:30 am

BOBLOOK wrote:Am sure with the proper bell housing adapter it will work , 13b to tremec is possible as so 3TC

man i been looking and asking people but no one knows.. or wants to share their knowledge ;)

BOBLOOK
Posts: 2283
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: 3tc adapter for a tremec t5 trans

Post by BOBLOOK » Fri Sep 09, 2016 7:16 pm

Well for what i now they use those W50 and W58. The W50 they use to install the jerico internals to make it even stronger.
After those blew the swap to clutch assistance transmissions or clutchless.
The day we learn to think

tavirace
Posts: 10
Joined: Wed Jul 24, 2013 12:54 am
Location: Ontario Canada

Re: 3tc adapter for a tremec t5 trans

Post by tavirace » Tue Sep 13, 2016 11:54 pm

Check with G-force transmissions.They have a plate and machine a input shaft for a T-5 transmission

Eville140
Posts: 1
Joined: Sat Aug 24, 2013 10:57 pm

Re: 3tc adapter for a tremec t5 trans

Post by Eville140 » Fri Oct 28, 2016 1:47 am

Grab a chuck of aluminum and start drilling holes.

Image

jimijames
Posts: 4
Joined: Fri Jun 22, 2018 11:43 am

Re: 3tc adapter for a tremec t5 trans

Post by jimijames » Fri Aug 09, 2019 3:38 pm

Did you have to machine the input shaft down for the pilot bearing or what did you do for the pilot bearing?

BOBLOOK
Posts: 2283
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: 3tc adapter for a tremec t5 trans

Post by BOBLOOK » Fri Aug 09, 2019 9:07 pm

jimijames wrote:
Fri Aug 09, 2019 3:38 pm
Did you have to machine the input shaft down for the pilot bearing or what did you do for the pilot bearing?
Machine an spigot bearing

Image
The day we learn to think

Post Reply