Sc14 on a stock 3tc

Webers, Cam selection and Ignition upgrades.

Moderators: BOBLOOK, AE25, pufito18

Post Reply
Natsroy
Posts: 3
Joined: Sat Mar 20, 2021 9:39 am

Sc14 on a stock 3tc

Post by Natsroy »

Hi as the title states, I plan on putting a Sc14 draw through setup on the my stock 3tc with stock pulley on the supercharger. My question is, what would bet an appropriate ratio cam for my setup
Thanks
bubbajohnson
Posts: 48
Joined: Mon Jun 24, 2013 12:13 am

Re: Sc14 on a stock 3tc

Post by bubbajohnson »

I'd suggest looking at one of the many Turbo-charged offerings from Schneider Cams http://schneidercams.com/2TC3TCturbocharged.aspx Match up the rpm range with what you'd like to have your engine run at and go to town.

- Rich
AE25
Moderator
Posts: 129
Joined: Tue Jul 16, 2013 9:03 am
Location: Auckland NZ
Contact:

Re: Sc14 on a stock 3tc

Post by AE25 »

Did this project happen?
Post Reply