Question Billet Block

Webers, Cam selection and Ignition upgrades.

Moderators: BOBLOOK, AE25, pufito18

User avatar
73GTV
Posts: 123
Joined: Wed Jul 10, 2013 2:17 am
Location: Warner Robins, Ga 31088

Question Billet Block

Post by 73GTV »

Has anyone had a source for a CNC Billet block for the 2TC and 3TC engine? If so, can you share that information, please?
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Question Billet Block

Post by BOBLOOK »

Haven't see any so far.
The day we learn to think
AE25
Moderator
Posts: 129
Joined: Tue Jul 16, 2013 9:03 am
Location: Auckland NZ
Contact:

Re: Question Billet Block

Post by AE25 »

Have you reached the limit of the stock block? Or cant find any decent ones.
Curious what power you're getting out of them
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Question Billet Block

Post by BOBLOOK »

Back then when the big boys experience limit they swap for 4Y blocks.
The day we learn to think
User avatar
73GTV
Posts: 123
Joined: Wed Jul 10, 2013 2:17 am
Location: Warner Robins, Ga 31088

Re: Question Billet Block

Post by 73GTV »

So the answer is no!

Then no one has improved or corrected the design errors as of yet.
User avatar
73GTV
Posts: 123
Joined: Wed Jul 10, 2013 2:17 am
Location: Warner Robins, Ga 31088

Re: Question Billet Block

Post by 73GTV »

BOBLOOK wrote: Tue Jan 18, 2022 10:36 am Back then when the big boys experienced limit they swap for 4Y blocks.
So go from a front mount oil pan to a rear mount oil pan.

Which cross member will they have to use for that engine installation?

Which timing chain cover would be used to seal this system?

Count the head bolts!

Look at the front of this block and let us see how any of the standard timing covers for a 2TC, 2TG and 3TC can be secured to this block!

Image
Image
Image
User avatar
73GTV
Posts: 123
Joined: Wed Jul 10, 2013 2:17 am
Location: Warner Robins, Ga 31088

Re: Question Billet Block

Post by 73GTV »

AE25 wrote: Mon Jan 17, 2022 11:24 pm Have you reached the limit of the stock block? (Or can't find any decent ones.)

Curious what power you're getting out of them!
That was not the direction for this leading subject. Does anyone have a source for a Cad-designed block as a replacement for the 2TC and 3TC engine block!

Standard design or redesigned was where I was going with this subject. (Focus!)

The redesign question was to ask about oil squirters for cooling below the piston crowns, or the addition of a four-bolt main for the crankshaft.

Correction of the oil supply issues to the third and fourth cylinders.

There would be additional modifications to increase the overall output from this engine design as well as needed improvements to increase the cylinder wall thickness to allow for an increase in overall bore limits.

That was why I asked this question in the first place.
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Question Billet Block

Post by BOBLOOK »

73GTV wrote: Tue Jan 18, 2022 5:37 pm
So go from a front mount oil pan to a rear mount oil pan.
It was an race car i can't see any drysump oil system
Which cross member will they have to use for that engine installation?
Race car no cross member
Which timing chain cover would be used to seal this system?
Am pretty sure custom 4y
Count the head bolts!
5 visible 5 inside the valve cover
Look at the front of this block and let us see how any of the standard timing covers for a 2TC, 2TG and 3TC can be secured to this block!
Check some pictures
The day we learn to think
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Question Billet Block

Post by BOBLOOK »

10426164_10152849387214285_4544821249023493407_n.jpg
10426164_10152849387214285_4544821249023493407_n.jpg (102.01 KiB) Viewed 3910 times
21565_277947934284_7793539_n.jpg
21565_277947934284_7793539_n.jpg (73.88 KiB) Viewed 3910 times
4y_engine_block_for_toyota.jpg
4y_engine_block_for_toyota.jpg (42.25 KiB) Viewed 3910 times
The day we learn to think
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Question Billet Block

Post by BOBLOOK »

If my memory can recall i do remember the racingstore was selling a kit for the 3tc 4y conversion but was an way back old forum time.
The day we learn to think
Post Reply