Te72 manual swap wiring

Moderators: AE25, BOBLOOK, pufito18

Post Reply
3tcte72
Posts: 5
Joined: Fri Mar 07, 2014 7:15 pm

Te72 manual swap wiring

Post by 3tcte72 » Wed Jan 12, 2022 4:49 am

Hey I’m doing a manual swap on a 1982 Corolla I need help with what wire to jump for the neutral/park safety switch and what wire to use for the reverse light any help would be great thanks

AE25
Moderator
Posts: 127
Joined: Tue Jul 16, 2013 9:03 am
Location: Auckland NZ
Contact:

Re: Te72 manual swap wiring

Post by AE25 » Sun Jan 16, 2022 9:40 pm

The park switch is usually in the gear selector so theres two bigger wires going to it that can be bridged. Im not familiar with the e7 auto wiring but theres often an extension cable running down to the shifter. So you may be able to unplug it up by the heater fan or behind steering column and bridge it there.

From memory the reverse light wiring on the manual connects to engine bay loom near top of gearbox tunnel on firewall. If i remember ill go check my coupe and confirm.

Post Reply