Saturn Upgrade Alternator Full Write up

The one stop topic for all the useful informations that gets lots in the mix.
Click her for the good stuff.

Moderators: AE25, BOBLOOK, pufito18

Saturn Upgrade Alternator Full Write up

Postby BOBLOOK » Fri Jun 21, 2013 6:58 pm

Saturn Upgrade Alternator Full Write up', 'NOTE: if full picture isnt viewable, right click on it and click view picture. Why do this swap? Having problems with dim lights, weak idle, or things shutting off? Upgrade your amps form 55* to 95* Eliminate External Regulator
Things you need: Saturn Alt. from 4cyl. 94-97 ($30)3TC Alt. Pulley Grinder Volt Meter!basic tools and knowledge. Start with the SAturn Alt.

First you need to take the Saturn Pulley off to replace it with the 3tc pulley. but leave off the 3tc pulley for now


Image

After the above^^^ place your 3tc pulley on the saturn alt. keeping the saturn fan spacer.Get your bracket and grind her down!

Image
Image
Image

grind a bit off the casing, not too much! its a thin case!

Image

Image

When installing, your belt may go right on with no problem. i had a small belt, i needed to place it on all the pulleys before installing any mounts. what ever works for you.This is how much adjustment you get from all the work yo have done! maybe more if you grind more and work harder at it. also Rooster_Cogburn says he drilled a new hole for better angle, i didnt.


Image

Image

Image

You can hook up your large thick wire that goes to the battery, just as you would on your regular ALT. its the single wire that is bolted to the casing.And Rooster_cogburn says to get a thicker wire or fusible link. i didnt.I use the stock Saturn ALt. has 2 wires and the 3tc has 3 and i used 2 from the 3tc and test the wires with the key in the ign position and test the plug with a volt meter\nyou should get 2 of them with 12v and 1 ground.And i tested the saturn alt. with both 12v connections and it worked.The saturn striped wire goes to the 12v on 3tc andthe solid goes to the ground on 3tc and eliminate the voltage regulator


Image

I have a 82 SR5. my charge light came on after this swap. i need to figure out what i need to do to get it to work
The day we learn to think
User avatar
BOBLOOK
 
Posts: 2262
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Saturn Upgrade Alternator Full Write up

Postby BOBLOOK » Fri Jun 21, 2013 8:56 pm

Here is the fix for the charge light for the corolla 76 The market ;yellow white wire need to go to the L( light) on the internal reg alternator for the charge light to go off.

Image
The day we learn to think
User avatar
BOBLOOK
 
Posts: 2262
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Saturn Upgrade Alternator Full Write up

Postby cnister1 » Sun Jul 21, 2013 10:58 pm

I got a question regarding the voltage regulator.

how do you eliminate the voltage regulator?

and do you need to jump wires on the regulator plug?
here is an example, check picture on post #16 http://community.ratsun.net/topic/7830- ... o-wire-in/

or do you leave the voltage regulator connected?
cnister1
 
Posts: 29
Joined: Mon Jul 08, 2013 3:31 am

Re: Saturn Upgrade Alternator Full Write up

Postby mikealike » Wed Oct 23, 2013 12:03 am

good write up.
Tuner, Builder and Racer. Hit me up for all you needs 2/3tc, 3SGTE or 2RZ custom fabbed parts.
Paypal luzunaris99@gmail.com
User avatar
mikealike
 
Posts: 441
Joined: Sat Jun 22, 2013 8:29 pm
Location: North Florida


Return to Do It Yourself

Who is online

Users browsing this forum: No registered users and 2 guests

cron