yo bubba wass up….your not driving it like you stole it then….haha….bubbajohnson wrote:So that would be a T-40 flywheel and pressure plate, with a W58 clutch plate? This is tempting. I still have one of your W-50 adapters I havn't installed because my T-50 has not broken yet . But I do like the W-58 gearing better.......lIsland Chain Racing wrote:You use the big fly wheel and pressure plate for 3t, w58 clutch to match.skellington wrote:oh - so - tempting. I have a w58 and a 2t -> t50 bell. What clutch parts do you use with this?
W58 to 3tc adapter plate
Moderators: BOBLOOK, AE25, pufito18
-
- Posts: 73
- Joined: Thu Jun 20, 2013 12:04 am
- Location: Vegas baby
Re: W58 to 3tc adapter plate
Re: W58 to 3tc adapter plate
Island you still have this w-58 adapter cause i need one ,I will double check this is the right tranny I have,but everything looks this is the one so far.I will contact u soon ,so please let me know if you still have.
MY 3tc is so Grumpy! I feel like eating one or two Rotaries for breakfast today!
Re: W58 to 3tc adapter plate
This is awesome!! I'm thinking about getting one. Now when you say use the "big 3tc flywheel" do you mean the factory flywheel? Also what slave cylinder would I have to use?
Thanks
Thanks
-
- Posts: 73
- Joined: Thu Jun 20, 2013 12:04 am
- Location: Vegas baby
Re: W58 to 3tc adapter plate
stock will do for bothslowrolla wrote:This is awesome!! I'm thinking about getting one. Now when you say use the "big 3tc flywheel" do you mean the factory flywheel? Also what slave cylinder would I have to use?
Thanks
Re: W58 to 3tc adapter plate
Please tell me these are still available?! Unlike Bubba I do blow T50boxes!
I have a W58 with the steel sandwhich plate from a N/A Supra and I need to mate it to my 2T/3TG engine. This looks like a life saver!
I don't abuse my T50 but the torque destroys the Input bearing and they are unobtainium at the moment so I really do need to upgrade.
Cheers,
Brian
I have a W58 with the steel sandwhich plate from a N/A Supra and I need to mate it to my 2T/3TG engine. This looks like a life saver!
I don't abuse my T50 but the torque destroys the Input bearing and they are unobtainium at the moment so I really do need to upgrade.
Cheers,
Brian
-
- Posts: 211
- Joined: Thu Jun 20, 2013 2:15 am
- Location: Massachusetts 02747
Re: W58 to 3tc adapter plate
I am interested in on of these adapter plates aswell. Ready to buy let me know. Thanks
-
- Posts: 73
- Joined: Thu Jun 20, 2013 12:04 am
- Location: Vegas baby
Re: W58 to 3tc adapter plate
hey guys, thnx for your interest...ill make a few and post it when its ready to ship out...give me a week or so...ill keep you posted....mahalos
-
- Posts: 59
- Joined: Wed Jun 26, 2013 3:39 am
- Location: Tennessee
Re: W58 to 3tc adapter plate
do you have to shorten the shafts with this?
Nothing here yet, just and empty space... I just wasted 10 seconds of your life when u finish reading this... LOL
Re: W58 to 3tc adapter plate
NO ,you dont.njccmd2002 wrote:do you have to shorten the shafts with this?
MY 3tc is so Grumpy! I feel like eating one or two Rotaries for breakfast today!
-
- Posts: 73
- Joined: Thu Jun 20, 2013 12:04 am
- Location: Vegas baby
Re: W58 to 3tc adapter plate
get er dun....just FYI...im still running the same plate with the same dam tranny for the pass 10 fregin years...haha...and only now i hear winning in that old W50,,,I'm just gonna drain the old fluid and refresh with some mesh and make her say.....bubbajohnson wrote:So that would be a T-40 flywheel and pressure plate, with a W58 clutch plate? This is tempting. I still have one of your W-50 adapters I havn't installed because my T-50 has not broken yet . But I do like the W-58 gearing better.......lIsland Chain Racing wrote:You use the big fly wheel and pressure plate for 3t, w58 clutch to match.skellington wrote:oh - so - tempting. I have a w58 and a 2t -> t50 bell. What clutch parts do you use with this?