Clutch for a 3tc with w50 tranny
Moderators: BOBLOOK, AE25, pufito18
Clutch for a 3tc with w50 tranny
So Im about to get a w50 already set up for a 3tc. So can I use the 3tc clutch? Is the input shaft splines the same?
-
- Posts: 84
- Joined: Tue Oct 01, 2013 11:10 am
Re: Clutch for a 3tc with w50 tranny
the shaft spines is bigger on the w50 tranny. Here is the lynk for the clutch you need...
http://www.euroexportinc.com/3tc/compet ... 1620c.html
Good Luck
http://www.euroexportinc.com/3tc/compet ... 1620c.html
Good Luck
Re: Clutch for a 3tc with w50 tranny
So this will fit the 3tc pressure plate? I have been looking at some kits and they are bigger. This is my last question about it, I know more about engines than clutches and trannys. Thanks man!
-
- Posts: 84
- Joined: Tue Oct 01, 2013 11:10 am
Re: Clutch for a 3tc with w50 tranny
Yes, it will fit the pressure plate and flywheel.
Re: Clutch for a 3tc with w50 tranny
Thank you for that link! It's just what I need for my W58 to 2T/3T gearbox conversion.ulises_te72 wrote:the shaft spines is bigger on the w50 tranny. Here is the lynk for the clutch you need...
http://www.euroexportinc.com/3tc/compet ... 1620c.html
Good Luck
Cheers.
-
- Posts: 59
- Joined: Wed Jun 26, 2013 3:39 am
- Location: Tennessee
Re: Clutch for a 3tc with w50 tranny
if you dont mind me asking, how was this tranny prepared?
adapter plate? because i have one with adapter plate, and wonder if the shaft would have to be shortened bacause of this...
adapter plate? because i have one with adapter plate, and wonder if the shaft would have to be shortened bacause of this...
Nothing here yet, just and empty space... I just wasted 10 seconds of your life when u finish reading this... LOL
Re: Clutch for a 3tc with w50 tranny
nope but they have told me to weld the 3tc bellhousing to the trans so it has more room to hold on too but I used the adapter plate and that clutch it works well just do a normal break in and your set