2tgeu kp61 mont help
Moderators: BOBLOOK, AE25, pufito18
2tgeu kp61 mont help
Hey guy was thinking of getting my engine months cut short to fit the rubber in between the engine and x-member mont as the 2tgeu fits bar no rubber. Has any done this. Or any other way. Any other tip would be helpful with this swap to.
Re: 2tgeu kp61 mont help
Or you can't find very tinny engine mount to install i can't remember back then guy was using fork lift truck engine mounts for therw low profile
The day we learn to think
-
- Posts: 784
- Joined: Fri Aug 09, 2013 2:59 am
Re: 2tgeu kp61 mont help
so to confirm.. te3# engine brackets and rubbers bolt a T motor to the kp61 crossmember?
-
- Posts: 784
- Joined: Fri Aug 09, 2013 2:59 am
Re: 2tgeu kp61 mont help
YeapAE25 wrote:so to confirm.. te3# engine brackets and rubbers bolt a T motor to the kp61 crossmember?
BUT...
You will need to drill the brackets mount hole about an inch tours the back of the car (just enlarge the hole next to the bracket mount hole to the size of the mount hole) and install the mount in that new hole, cuz if you try to install the engine in the OEM bracket hole it will be too far back!
SF5 FOZZY
Re: 2tgeu kp61 mont help
any idea if te3 brackets are same as te2 or ta22?
-
- Posts: 784
- Joined: Fri Aug 09, 2013 2:59 am
Re: 2tgeu kp61 mont help
TE2X yes they are the same TA22 dont know, as we never get those here in the States!AE25 wrote:any idea if te3 brackets are same as te2 or ta22?
SF5 FOZZY