Is it true that if water goes in youre transmission(manual) it damage the gears??
Cause I have a 4ac transmission and it was in my yard and that day it has rain and the water went into the tail shaft in . Now I was cleaning the tranny I drain all that water with oil and then I was trying if the gears were good but it doesnt goes in any gears it stays in neutral
Now if that transmission needs a rebuild im not gonna do that I have another t50 onder my other sr but it is from the 2T engine , can I just put the bellhousing from the 4A and put the 22spline input shaft?? It's for swaping a 4age , any advise??
water in my tranny!
Moderators: BOBLOOK, AE25, pufito18
-
- Posts: 38
- Joined: Fri Sep 05, 2014 4:22 am
- Location: Bushiri , Aruba
Re: water in my tranny!
Water won't harm the gears but the bearing !
Rebuild is expensive check for another one !
Rebuild is expensive check for another one !
The day we learn to think
-
- Posts: 38
- Joined: Fri Sep 05, 2014 4:22 am
- Location: Bushiri , Aruba
Re: water in my tranny!
Damn man :s the t50 from the 4a is very hard to find on aruba you just find the t50 from the 2tc or 3tc , but can I put the bellhousing amd the 22spline inputshaft from the 4a t50 on the 2tc t50???BOBLOOK wrote:Water won't harm the gears but the bearing !
Rebuild is expensive check for another one !
Re: water in my tranny!
I dont see why not t50 is a t50 but there are different splines on them and bell housings change but thats all
-
- Posts: 38
- Joined: Fri Sep 05, 2014 4:22 am
- Location: Bushiri , Aruba
Re: water in my tranny!
Thxn bro!hemilove wrote:I dont see why not t50 is a t50 but there are different splines on them and bell housings change but thats all
-
- Posts: 38
- Joined: Fri Sep 05, 2014 4:22 am
- Location: Bushiri , Aruba
Re: water in my tranny!
I'm going to disasembled both of them and put the 22spline on the one im using and the bellhousing to