water in my tranny!

[SantanaAE86]

Is it true that if water goes in youre transmission(manual) it damage the gears??
Cause I have a 4ac transmission and it was in my yard and that day it has rain and the water went into the tail shaft in . Now I was cleaning the tranny I drain all that water with oil and then I was trying if the gears were good but it doesnt goes in any gears it stays in neutral

Now if that transmission needs a rebuild im not gonna do that I have another t50 onder my other sr but it is from the 2T engine , can I just put the bellhousing from the 4A and put the 22spline input shaft?? It's for swaping a 4age , any advise??

[BOBLOOK]

Water won't harm the gears but the bearing !

Rebuild is expensive check for another one !

[SantanaAE86]

Water won't harm the gears but the bearing !

Rebuild is expensive check for another one !

Damn man :s the t50 from the 4a is very hard to find on aruba you just find the t50 from the 2tc or 3tc , but can I put the bellhousing amd the 22spline inputshaft from the 4a t50 on the 2tc t50???

[hemilove]

I dont see why not t50 is a t50 but there are different splines on them and bell housings change but thats all

[SantanaAE86]

I dont see why not t50 is a t50 but there are different splines on them and bell housings change but thats all

Thxn bro!

[SantanaAE86]

I'm going to disasembled both of them and put the 22spline on the one im using and the bellhousing to

[BOBLOOK]

Trany is identical bell housing in minor things