Nick Baker, 24, Peoria IL
Working on putting a 2TC in my 1959 MG MGA. I know my way in and out of MGs but don't know much about the 2TC/3TC. My last project was a MG Midget with a 2TC (https://www.youtube.com/watch?v=y5uJHT5_m74). I just Finished rebuildig the engine and am in need of a few extra parts that are missing.
Parts Needed:
-Water Neck
-Alternator Bracket
-Water Pump Pulley
-Imput shaft seal for my T50 (I dont know how to find one of these, I dont know if all T50s are the same or if there are variations, any help would be apreciated)
Also I have 3 different heads, all similar but small variations and different casting numbers, anyone know anything about this?
-Nick
MG with 2TC Power
Moderators: BOBLOOK, AE25, pufito18
-
- Posts: 2
- Joined: Wed Jan 07, 2015 6:51 pm
- Location: Peoria, Illinois
- Contact:
MG with 2TC Power
Nicholas J. Baker
Re: MG with 2TC Power
http://members.iinet.com.au/~stepho/BritishJunk wrote:Nick Baker, 24, Peoria IL
Working on putting a 2TC in my 1959 MG MGA. I know my way in and out of MGs but don't know much about the 2TC/3TC. My last project was a MG Midget with a 2TC (https://www.youtube.com/watch?v=y5uJHT5_m74). I just Finished rebuildig the engine and am in need of a few extra parts that are missing.
Parts Needed:
-Water Neck
-Alternator Bracket
-Water Pump Pulley
-Input shaft seal for my T50 (I don't know how to find one of these, I don't know if all T50s are the same or if there are variations, any help would be appreciated)
Also I have 3 different heads, all similar but small variations and different casting numbers, anyone know anything about this?
-Nick
Take your time and look at this section slow and careful and most of your specifications for the engine and manuals are available here.