Te71 Coupe
Moderators: BOBLOOK, AE25, pufito18
Re: Te71 Coupe
Weekend in the garage...
Modified pipe cos of that G bellhousing and clutch fork.
Bracket for the w55
Moore STP
Rear from ta40 carina, going to sandblast that one
Rust protection with Tectyl
Next week i get my trd lsd rear back and hopefully sandblasted that axle before that.
Modified pipe cos of that G bellhousing and clutch fork.
Bracket for the w55
Moore STP
Rear from ta40 carina, going to sandblast that one
Rust protection with Tectyl
Next week i get my trd lsd rear back and hopefully sandblasted that axle before that.
Re: Te71 Coupe
Sandblasted and painted.
Also some new brake and clutch lines.
Re: Te71 Coupe
Good job! Nice to see another coupe gets restored.
If they don´t have classic Toyota´s in heaven.. I´M NOT GOING!!!
Re: Te71 Coupe
Thanks, however this was way more rusted and damaged than i expected.MTyn wrote:Good job! Nice to see another coupe gets restored.
Today was flywheel,s turn, machined straight.
and testing the pressure plate.
Looks fine but have to test it before final installation.
Had to look new seats, those recaros didnt fit so i ordered cheap fk racing seattle seats.
Re: Te71 Coupe
I didnt have the hydraulic press so i used bottle jack and volvo fl16 special tool
Last edited by Heiska on Thu Apr 02, 2015 8:26 pm, edited 1 time in total.
Re: Te71 Coupe
Thanks.BOBLOOK wrote:Nice fitments
Today i tryed to fit panhard and that was too short ---> so i maked it longer.
Ce70 drive shaft was too long, luckily i founded shorter and that fit too.
Ta40 axle was little wider than te71
also made some clutch lines and assembled rear brakes and hand brakes...
Have to keep it comming, summer is comming