Like the title says.
Swapped an ae71 sedan with a 3tc and t50
Car had been swapped previously..then had the auto 4ac dropped back in.
But we cannot seem to build ANY pressure in the pedal..
New master cylinder (clutch)
New hard lines. Bends are fine. And no blockage.
Any help?!!!!
Te72 clutch on ae71 no pressure
Moderators: BOBLOOK, AE25, pufito18
-
- Posts: 52
- Joined: Tue May 13, 2014 11:26 pm
- Location: Portland,OR
- oldeskewltoy
- Posts: 242
- Joined: Thu Jun 20, 2013 10:17 pm
Re: Te72 clutch on ae71 no pressure
did you bleed it?
-
- Posts: 52
- Joined: Tue May 13, 2014 11:26 pm
- Location: Portland,OR
Re: Te72 clutch on ae71 no pressure
We've bled it and still feels soft.
Everything is new.
it was previously and auto.
When he pushes the clutch in. It flexes on the firewall.
Everything is new.
it was previously and auto.
When he pushes the clutch in. It flexes on the firewall.
- oldeskewltoy
- Posts: 242
- Joined: Thu Jun 20, 2013 10:17 pm
Re: Te72 clutch on ae71 no pressure
firewall movement is quite common, it shouldn't make the pedal "soft". If the pedal is "soft", it still is likely a bleed issue.