Hi Guys,
Where is the best place to get a good signal for my aftermarket tach?
I've added a pic, could someone point out where to connect the wire?
Thanks!
Where to get a good Tach signal
Moderators: BOBLOOK, AE25, pufito18
- Teun
- Posts: 71
- Joined: Thu Jun 20, 2013 9:00 am
- Location: on the roadside somewhere in the Netherlands
- Contact:
Where to get a good Tach signal
--=...Lowest BHP title owner...=--
Re: Where to get a good Tach signal
Some ignitors have an extra tach output wire....... most don't has.
You will have to hook the tach to the negative - of the coil.... the green wire on most aftermark tach
You will have to hook the tach to the negative - of the coil.... the green wire on most aftermark tach
The day we learn to think
- Teun
- Posts: 71
- Joined: Thu Jun 20, 2013 9:00 am
- Location: on the roadside somewhere in the Netherlands
- Contact:
Re: Where to get a good Tach signal
thanks, so the right one on the white bar in the pic?
--=...Lowest BHP title owner...=--
-
- Posts: 84
- Joined: Tue Oct 01, 2013 11:10 am
Re: Where to get a good Tach signal
negative wire of the Ignition coil.
Re: Where to get a good Tach signal
No thats still a plus reduced voltTeun wrote:thanks, so the right one on the white bar in the pic?
Negative coil
- Attachments
-
- ign2ani.gif (17.87 KiB) Viewed 6863 times
The day we learn to think