3tc turbo problems
Posted: Sun Oct 18, 2015 1:06 pm
New to this engine and turbos.. Have a few questions and would appreciate any help! The engine is a stock bottom end 3tc with a Crower Turbo cam with maching springs and blow through Weber carb. First, what spark plugs are you using and what kind of ignition timing are you all running? My setup is a BRD mech adv distributor with MSD coil/box. Second, what type of exhaust manifold gasket are you guys using? Lastly, what are you setting you base idle fuel pressure at with a boost reference regulator. The fuel setup is a Walbro 255 with 3/8 pres and return . Looking to run 10 psi of boost. Thanks again.