Page 1 of 1

My TE31, also asking help on how i should get more power

Posted: Fri Jul 26, 2013 11:57 pm
by corollakid
This is my 1979 TE31,
Image
It's extremely clean, got it off this guy who looked like a pirate ha
Image
Image
Image
So this is the rear end, it has definitely been lowered already but i'm unsure of what has been done to the suspensions and such, I have a brand new driveshaft in there also. I would really like to upgrade them, so if any one has any idea of what I should do please let me know.
Image
Image
This next one is the front end, a pic of the oil pan.
Image
Image
Next onto the bay, its a 2T-C, my plans for it are too slap new intake and exhaust manifolds, a 32/36 weber, cam it, and later on rebuild the engine bore it out and slap new internals throughout.
Image
Image
The reason for all the horns and such is it has an alarm system installed.
This is the Aisin Carb, hoping to switch to a 32/36 Weber and pick up that Offenhauser C series intake.
Image
This is the Engine and the Exhaust manifold, it looks like my heat and ac have been bypassed. Im looking to put headers on this bad boy.
Image
Ha look at the tiny sway bar..
Image
At this point you may be wondering why there are two batteries in this thing, and I would reply..
Image
Ya those are 4 6x9 speakers, nice little system. Don't mind the seatbelts im in the process of installing..
Image
Image
Do you happen to know where I can pickup different door mirrors? These things really annoy me..
Image
Last but not least, here's my confirmation of what's in it,
Image

Re: My TE31, also asking help on how i should get more powe

Posted: Sat Jul 27, 2013 10:45 pm
by BOBLOOK
Welcome to the forum nice car

Simple modification to start with is like msd 6 , weber 32 df adapter plate mount on stock manifold

Re: My TE31, also asking help on how i should get more powe

Posted: Sun Jul 28, 2013 6:04 am
by corollakid
Hey thank you!
I do plan on putting a 32/36 weber on there, what do you think the gains would be?
Also, I really want to swap out my rear end, what are the more common swaps into this one or what would be the easiest relatively?

Re: My TE31, also asking help on how i should get more powe

Posted: Sun Jul 28, 2013 9:11 am
by BOBLOOK
Not much ! the throttle response will increase a lot !

Why you want swap the rearend ?

Re: My TE31, also asking help on how i should get more powe

Posted: Mon Jul 29, 2013 3:14 am
by corollakid
because I really want to get like 200-300 hp in this bad boy :)
so any help with what rear end I should and could put in there would be greatly appreciated!