Question Billet Block
Moderators: BOBLOOK, AE25, pufito18
Question Billet Block
Has anyone had a source for a CNC Billet block for the 2TC and 3TC engine? If so, can you share that information, please?
Re: Question Billet Block
Have you reached the limit of the stock block? Or cant find any decent ones.
Curious what power you're getting out of them
Curious what power you're getting out of them
Re: Question Billet Block
Back then when the big boys experience limit they swap for 4Y blocks.
The day we learn to think
Re: Question Billet Block
So the answer is no!
Then no one has improved or corrected the design errors as of yet.
Then no one has improved or corrected the design errors as of yet.
Re: Question Billet Block
So go from a front mount oil pan to a rear mount oil pan.
Which cross member will they have to use for that engine installation?
Which timing chain cover would be used to seal this system?
Count the head bolts!
Look at the front of this block and let us see how any of the standard timing covers for a 2TC, 2TG and 3TC can be secured to this block!
![Image](https://i.imgur.com/IR3ISRI.png)
![Image](https://i.imgur.com/qDaXq9S.png)
![Image](https://i.imgur.com/Ec1AVqL.png)
Re: Question Billet Block
That was not the direction for this leading subject. Does anyone have a source for a Cad-designed block as a replacement for the 2TC and 3TC engine block!
Standard design or redesigned was where I was going with this subject. (Focus!)
The redesign question was to ask about oil squirters for cooling below the piston crowns, or the addition of a four-bolt main for the crankshaft.
Correction of the oil supply issues to the third and fourth cylinders.
There would be additional modifications to increase the overall output from this engine design as well as needed improvements to increase the cylinder wall thickness to allow for an increase in overall bore limits.
That was why I asked this question in the first place.
Re: Question Billet Block
So go from a front mount oil pan to a rear mount oil pan.
Which cross member will they have to use for that engine installation?It was an race car i can't see any drysump oil system
Which timing chain cover would be used to seal this system?Race car no cross member
Count the head bolts!Am pretty sure custom 4y
Look at the front of this block and let us see how any of the standard timing covers for a 2TC, 2TG and 3TC can be secured to this block!5 visible 5 inside the valve cover
Check some pictures
The day we learn to think
Re: Question Billet Block
If my memory can recall i do remember the racingstore was selling a kit for the 3tc 4y conversion but was an way back old forum time.
The day we learn to think