Mr track car!
Posted: Thu Jun 20, 2013 4:32 pm
So I havn't really had a build thread on here, for obvious reasons(Not 3tc yet), but anyways. I will start with some photos and maybe back track to how it got here.
So the basic are:
chassis
1980 Canadian TE72, a little beat up but not too rusty.
86 front suspension, koni race, 8kg springs, 40mm RCA, BCWorks LCAs/Knuckles/Tierods. Battel Version style rack spacers.
6kg swift springs with HTS short stroke rears.
GTS 6.7" with a spool full heim 5 link with relocated uppers, under the seats so it still has full interior!
Drivetrain
AE101GZE bottom end, OEM .040 oversize pistons, ARP most things, cometic 1mm HG, BCWorks tubular exh mani/downpipe/Intake, 1ZZ coils, GT2560R at 10psi, SARD FPR, walbro 255LPH pump, denso 440cc injectors (7mgte), MS2. ~200whp
W58 trans with an ACT 6 puck.
The engine/trans have been moved back 40mm also.
Here are my 3 cars!
I will find some high lights later!
So the basic are:
chassis
1980 Canadian TE72, a little beat up but not too rusty.
86 front suspension, koni race, 8kg springs, 40mm RCA, BCWorks LCAs/Knuckles/Tierods. Battel Version style rack spacers.
6kg swift springs with HTS short stroke rears.
GTS 6.7" with a spool full heim 5 link with relocated uppers, under the seats so it still has full interior!
Drivetrain
AE101GZE bottom end, OEM .040 oversize pistons, ARP most things, cometic 1mm HG, BCWorks tubular exh mani/downpipe/Intake, 1ZZ coils, GT2560R at 10psi, SARD FPR, walbro 255LPH pump, denso 440cc injectors (7mgte), MS2. ~200whp
W58 trans with an ACT 6 puck.
The engine/trans have been moved back 40mm also.
Here are my 3 cars!
I will find some high lights later!