Thanks Mikemikealike wrote:good Deal Carlos
FS: 2/3tc block off plates ***PICS UP***
Moderators: BOBLOOK, AE25, pufito18
-
- Posts: 65
- Joined: Tue Jul 30, 2013 3:15 am
- Location: Trenton, SC
Re: FS: 2/3tc block off plates ***PICS UP***
-
- Posts: 9
- Joined: Sat Aug 10, 2013 5:40 pm
Re: FS: 2/3tc block off plates ***PICS UP***
The 2 bolt and brass fitting unit to the left and under the oil filter. I took a photo but my phone wont let me upload it. It's what the annoying little exhaust ports underneath the header go to on the passenger side of the engine block. My car is a 1980 3tc corolla and it has this system instead of an air pump. If you can get me a picture or just even a diagram of what it looks like, I can tell you for sure. I've been trying to get rid of it since I bought the car.TPR Motorsports wrote:U mean for the early 2tc when u take off the valve there is a hole in the block???Mr.Liftback wrote:Are you able to make the air suction unit block offs? Not the exhaust air ports, BRD has those. I'm talking about on the passenger side of the engine, that bubbly annoying valve unit.
Thanks again,
Michael.
If so, Yes, I have those already programmed just not made but I can make them too
Thanks,
Mike
These cars are better than any girlfriend.
-
- Posts: 65
- Joined: Tue Jul 30, 2013 3:15 am
- Location: Trenton, SC
Re: FS: 2/3tc block off plates ***PICS UP***
It looks just like a fuel pump block off plate just a little wider
I just unbolt all that junk n put it in the trash. I've never had to cover anything up. Maybe u got some weird California emissions car.
I just unbolt all that junk n put it in the trash. I've never had to cover anything up. Maybe u got some weird California emissions car.
-
- Posts: 9
- Joined: Sat Aug 10, 2013 5:40 pm
Re: FS: 2/3tc block off plates ***PICS UP***
Seems perfect, how much for it?
These cars are better than any girlfriend.
-
- Posts: 65
- Joined: Tue Jul 30, 2013 3:15 am
- Location: Trenton, SC
Re: FS: 2/3tc block off plates ***PICS UP***
Shoot me a picture of what u are talking about, what I said before about unbolting it, I meant I take off the stock stuff n don't put anything back on to eliminate the pump n exhaust tubes n all that mess.
Shoot a picture n text it to me or post it here.
Thanks man, I'd just hate to make u the wrong part.
Shoot a picture n text it to me or post it here.
Thanks man, I'd just hate to make u the wrong part.
Re: FS: 2/3tc block off plates ***PICS UP***
nice!! will have too pickup one of each here soon.
-
- Posts: 65
- Joined: Tue Jul 30, 2013 3:15 am
- Location: Trenton, SC
Re: FS: 2/3tc block off plates ***PICS UP***
Let me know. Thankscorolllin wrote:nice!! will have too pickup one of each here soon.
-
- Posts: 65
- Joined: Tue Jul 30, 2013 3:15 am
- Location: Trenton, SC
Re: FS: 2/3tc block off plates ***PICS UP***
I have got allot of positive comments from customers who have received my parts recently, just wanted to say thank you for all the support now and over the years.
Thanks guys!!!
Thanks guys!!!
Re: FS: 2/3tc block off plates ***PICS UP***
I would like to order a 3tc egr block off plate, you ship to Oregon?
-
- Posts: 65
- Joined: Tue Jul 30, 2013 3:15 am
- Location: Trenton, SC
Re: FS: 2/3tc block off plates ***PICS UP***
Not a problemJAG541 wrote:I would like to order a 3tc egr block off plate, you ship to Oregon?
Thanks for the support