NME308 wrote:Did you just say what I think you just said???mallito1.8 wrote:the idiot used a sander to shave my head and was not flat so that leads to the root of failure
Well I'm glad to see you have decided to do the reassembly yourself! Even if you don't have a clue you surely can't do worse that your idiot friend!!!mallito1.8 wrote:...used a sander to shave my head...
I hope it all goes well for you from here.
actually my friend did the putting together but a local machinist messed up my head wich he went out of business no wonder
Cheers,
Jason
la otra 3tc starlet
Moderators: BOBLOOK, AE25, pufito18
- mallito1.8
- Posts: 264
- Joined: Sun Jun 23, 2013 3:04 pm
- Location: Manchester New Hampshire
Re: la otra 3tc starlet
-
- Posts: 784
- Joined: Fri Aug 09, 2013 2:59 am
Re: la otra 3tc starlet
Mallito if you are using a copper head gasket u need to use hi temp RTV in order to seal the water passages, plus as far as i know your head must have a land to receive the O-ring from the block so it can achieve a proper sealed chamber and the gasket itself lands flat against the block and head with proper clamping force, just saying, paint the head with die blue and torque it down without gasket so it marks exactly where the o rings are around each cylinder then take it to the machine shop to cut the groove.
SF5 FOZZY
Re: la otra 3tc starlet
Those copper gasket work best if you-re not running water true the block ! Head welded running water in the front to the back.
Sorry to hear mallito hope you fix it soon !
Sorry to hear mallito hope you fix it soon !
The day we learn to think
- mallito1.8
- Posts: 264
- Joined: Sun Jun 23, 2013 3:04 pm
- Location: Manchester New Hampshire
Re: la otra 3tc starlet
Oh okay why not running cosmetic gasket
I remember Eville was running half filled block on E85 so far i knew he didn't had cooling issue
I remember Eville was running half filled block on E85 so far i knew he didn't had cooling issue
The day we learn to think
- mallito1.8
- Posts: 264
- Joined: Sun Jun 23, 2013 3:04 pm
- Location: Manchester New Hampshire
Re: la otra 3tc starlet
I was told you can't run cometic gaskets with a o ring block
Re: la otra 3tc starlet
No you can't !mallito1.8 wrote:I was told you can't run cometic gaskets with a o ring block
am the one talking nonsense i didn't put attention to your picture
Your block is o-ringed
The day we learn to think
- mallito1.8
- Posts: 264
- Joined: Sun Jun 23, 2013 3:04 pm
- Location: Manchester New Hampshire
Re: la otra 3tc starlet
Oooo ring. HahahBOBLOOK wrote:No you can't !mallito1.8 wrote:I was told you can't run cometic gaskets with a o ring block
am the one talking nonsense i didn't put attention to your picture
Your block is o-ringed